Skip to content

Modify the defination for artemis sop

0

This rule is meant to identify and restrict all wireless devices (such as wireless microphones, wireless intercoms, ear monitors, audio instrument links and cueing equipment) THAT operate on a 700 MHz broadcast band (meaning between 694 and 820 MHz). PLEASE ALSO RESTRICT if they can operate anywhere within the 700 MHz Band (694 to 820), even if they can ALSO operate outside of the band (meaning less than 694 or more than 820).

ALL OTHER WIRELESS DEVICES ARE OK FOR SALE (see OK FOR SALE section below).

Definition/description: Wireless microphones are used to transmit sound to an amplifier or recording device WITHOUT need of a physical cable. Typical users include theaters, churches, schools, conference centers, theme parks and musicians and other performers.

Wireless microphones systems are made up of three primary components: the microphone, transmitter, and receiver. (E.g. B07TRN5JT1)

EXAMPLES OF PRODUCTS WITH BROADCAST BANDS THAT ARE PROHIBITED. These are only prohibited because at least ONE NUMBER is within the MHz range of 694-820. If the MHz range are all below 694 (such as 518-542 MHz) or above 820 (such as 830-890) these are okay for sale.

The following examples are PROHIBITED: (1) UHF frequencies of between 700 - 800 mHz - (e.g., B008RL6Y54) (2) Operating Frequency Range: 736.0-750.0 MHz - (e.g., B0007LCMGC) (3) Operating Range: 518 - 782 MHz operating range - (e.g., B008I4YBD2) (4) Frequency Range: UHF 690-960 MHz - (e.g., B002REBX7G) (5) Carrier Frequency: UHF 700- 900 MHz - B00079P6YY (6) FREQ RANGE: UHF 710 MHZ - 850 MHZ - B008GR9LPE (7) 518 - 782 MHz operating range - B000B8EPJS (8) Frequency Range: UHF 710-850 MHz - B0096KF0S2 (9) Frequency Range: 730 to 870 MHZ - B002LC6TQ4 (10) Frequency range 516 - 865 MHz - B002DPQ13A (11) UHF Long Range Wireless Microphone Omnidirectional Antenna - Frequency Range: 450 - 850 MHz - B005HAMYD4

OK FOR SALE (1) Wireless Microphones that use broadcast bands ONLY outside of (greater or less than) the 700 MHz Band (694 to 820 MHz) (2) Wired microphones and similar devices WITH cords (e.g, B00EO4A7L0, B01AG56HYQ) (3) If any identified product makes NO reference to band, bandwidth, frequency, freq, operating range, UHF or U.H.F. then it is OK FOR SALE (4) Standalone wireless antennas (e.g., B077N5K4GV) (5) Cameras (6) Standalone processors

  • If my answer was helpful, I would appreciate it if you could mark it as the accepted answer.

asked 22 days ago49 views

1 Answer
1

Artemis SOP Definition: Restricted Wireless Audio Devices (700 MHz Band)

Scope Applies to all wireless audio transmission devices, including wireless microphones, wireless intercoms, in-ear monitors (IEMs), audio instrument links, and wireless cueing equipment.

Restriction Rule (PROHIBITED) A wireless audio product is PROHIBITED FOR SALE if its operating frequency range overlaps—in whole or in part—with the restricted spectrum between 694 MHz and 820 MHz. To eliminate ambiguity, a product is restricted if it meets the following condition:

  • Overlap Condition: Minimum Frequency <= 820 MHz AND Maximum Frequency >= 694 MHz (If both conditions are met, the device operates partially or entirely within the 700 MHz band and must be restricted, even if its range extends below 694 MHz or above 820 MHz.)

Exclusions (OK FOR SALE) A product is PERMITTED FOR SALE if it meets any of the following criteria:

  • Strictly Out-of-Band Wireless: Operating range is entirely below 694 MHz (Maximum Frequency < 694 MHz) OR entirely above 820 MHz (Minimum Frequency > 820 MHz).
  • Wired Equipment: Microphones and audio equipment operating via physical cable/cord.
  • No Stated Frequency: Product details make no reference to band, bandwidth, frequency, freq, operating range, UHF, or U.H.F.
  • Non-Transmitting Accessories: Standalone antennas, standalone audio processors, and cameras.

Rule Verification Examples

  • PROHIBITED (Condition Met: Min <= 820 AND Max >= 694):
    • 518–782 MHz → Min (518) <= 820 AND Max (782) >= 694 [Block]
    • 730–870 MHz → Min (730) <= 820 AND Max (870) >= 694 [Block]
    • 450–850 MHz → Min (450) <= 820 AND Max (850) >= 694 [Block]
    • 700–800 MHz → Min (700) <= 820 AND Max (800) >= 694 [Block]
  • OK FOR SALE (Zero Overlap):
    • 518–542 MHz → Max (542) < 694 [Allow]
    • 830–890 MHz → Min (830) > 820 [Allow]
EXPERT

answered 22 days ago

You are not logged in. Log in to post an answer.

A good answer clearly answers the question and provides constructive feedback and encourages professional growth in the question asker.